12-3. INSPECTION OF COMPONENTS
Gear Shift Lever
Check lower end of gear shift lever where gear
shift fork shaft contact, @ and 0, for wear
and any kind of damage. Worn or damaged gear
shift lever must be replaced with a new one.
Fig. 12-7
Reverse & Low Speed Select Guide Pins
Check both select guide pins where gear shift
lever contacts, 0, for stepped wear. Replace
worn select guide pin.
Fig. 12-8
12-4
Move shaft and check low speed select guide
pin for smooth movement without rattle. If
found defective, replace it and apply grease to
pin.
Fig. 12-9
Gear Shift Fork Shaft
Visually check each gear shift fork shaft (High,
Low and Reverse) where gear shift lever contacts,
0
Fig. 12-10