Engine Coolant Temperature Warning Light; Oil Pressure Warning Light - Suzuki SY413 Service Manual

8-8 BODY ELECTRICAL SYSTEM
1. Engine coolant temperature switch
2. Engine coolant temperature sender gauge
1. Engine coolant temperature switch
ENGINE COOLANT TEMPERATURE
WARNING LIGHT
ENGINE COOLANT TEMPERATURE SWITCH
REMOVAL AND INSTALLATION
Refer to "ENGINE COOLANT TEMPERATURE METER AND
SENDER GAUGE" in this section.
INSPECTION
Warm up ECT switch.
Make sure its continuity with increase of its temperature.

OIL PRESSURE WARNING LIGHT

OIL PRESSURE SWITCH
INSPECTION
Use an ohmmeter to check switch continuity.
During Engine Running
REMOVAL AND INSTALLATION
Refer to Section 6A4 "OIL PRESSURE CHECK" in this manual.
1. To wiring harness
2. Cylinder block
3. Oil pressure switch
GLOW PLUG INDICATOR LIGHT
INSPECTION
Check glow plug relay.
Refer to section 6E3 "ENGINE and EMISSION CONTROL SYS-
TEM" section.
Temperature
1135C (2355F) or more
At Engine Stop
Continuity
Continuity
8
W)
No continuity (
Continuity (0 W)