Bevel Pinion Bearings - Suzuki Samurai 1986 Service Manual

Bevel Pinion Bearings

A press must be used to install two tapered
roller bearings on bevel pinion. Outer races are
press-fitted into the differential carrier and
inner races onto the pinion.
NOTE:
When replacing bevel pinion bearings, check to
ensure that gear side and flange side bearings are
the same marker's products.
1) For outer race of flange side bearing, use
special tool as shown below.
Fig. 16-28 @ Special tool (Bearing installer
2) For outer race of gear side bearing, use
special tools.
Fig. 16-29
attachment 09924-74510)
09926-683 10)
16-14
3) After installing proper bevel pinion shim(s),
press-fit inner race to bevel pinion using
special tools.
09925-18010)
Fig. 16-30
09940-53111)
4) After installing bevel pinion, spacer, bearings
and universal joint flange to carrier and
carrying out "bevel pinion bearing preload
as described previously, cau I k
adjustment"
bevel pinion nut to prevent it from loosening.
Fig. 16-30-1