Extending A Volume On Dynamic Disks (Non-Clustered Systems Only) - HP StorageWorks 4000s - NAS Administration Manual

Disk Management
Figure 42: Extending a volume (basic disk)
6. Click OK.

Extending a Volume on Dynamic Disks (non-clustered systems only)

The WebUI allows for the extension of volumes based on a dynamic disk or a set of dynamic
disks. To extend a volume perform the following steps:
1. Click the Disks tab.
2. Click the Volumes tab.
3. Click Manage.
4. Select the volume to extend and select Extend.
82 NAS 4000s and 9000s Administration Guide