Admin Cannot List And Map Domain Users And Groups For Services For Nsf Mapping Unless The Services For Nfs Admin Is Logged Into The Domain; User Name Mapping Japanese Characters; Mapping Service Fails To Start - HP StorageWorks 4000s - NAS Release Note

All logical disks to be used for NFS sharing should be mounted
on a drive letter, not on a reparse or mount point. If no NFS
shares will be created on a particular logical disk, that virtual
disk may be mounted on a mount point instead of a drive letter.
Admin cannot list and map domain users and groups for
Services for NSF mapping unless the Services for NFS
admin is logged into the domain
The administrator must log into the domain before mapping
domain users and groups. If the admin is not logged into the
domain, the domain user or group is not displayed on the list of
Windows users or groups and thus cannot be mapped.

User name mapping Japanese characters

User name mapping for the network file system (NFS) server
does not support Windows or UNIX user names containing
Japanese characters.
The names of NFS client groups that are used by the NFS server
cannot contain Japanese characters.

Mapping service fails to start

All network ports must be attached to an active link or contain a
port terminator, or the user mapping service will fail to start on
boot. In conjunction with this failure, an error event ID 7034 is
logged in system log with details as followed:
Source: Service Control Manager
Category: none
eventID : 7034
file name: netevent.dll
Description: the user name mapping service terminated
unexpectedly.
9