Reference Table: Control Panel Parameters, Menus, And Settings - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual

Reference Table:
Parameter In Setup Mode
Settings menu:
*
*
Edit the default:
‡
Edit the default:
*
‡
(for example)
Edit the default:
*
‡
Settings menu:
*
Settings menu:
*
‡
Not available
in setup mode
Show setting only
(set at factory)
Show setting only Show setting only Displays the running firmware version
Show setting only Show setting only Displays the firmware version of the boot ROM
Prompt:
Prompt:
*
marks parameters affected by
‡
marks parameters also set using HD Server Admin, the embedded administration tool
-
3 6 Configuration Using the Control Panel
Control Panel Parameters, Menus, and Settings
In View Mode
Show setting only Selects the mechanism for determining the IP
Show setting only The Internet address of the server. The default
Show setting only Determines when the traffic is directed through a
Show setting only Address of the default router or gateway, through
Show detected
speed followed by
current setting:
(default)
...
...
...
...
...
Show setting only Specifies whether the server will automatically
(default)
Show list only
(default)
Show setting only Displays the hardware (LAN) address of the
Not available in
view mode
Prompt:
Description
address, subnet mask, and default gateway.
setting
gateway. The default you see depends on the class
of IP address that is set (example is class C).
which all traffic directed outside the local network
(according to the subnet mask) is directed. The
default is that no default gateway is set.
You can view the actual speed & duplex mode
detected, followed by current setting in
parentheses, e.g.
settings:
Autodetect and set network speed & duplex mode.
(10H)Fix speed to 10Base-T, half duplex.
(10F)Fix speed to 10Base-T, full duplex.
(100H)Fix speed to 100Base-T, half duplex.
(100F)Fix speed to 100Base-T, full duplex.
The setting is not in effect: network not connected!
restart (up to 3 times) after a critical error, or
whether it will halt.
Displays a list of scrolling alert messages. Alerts
can be cleared by pressing
server.
code.
Sets some parameters on control panel (
HD Server Admin to defaults for first installation.
Allows you to specify a control password to control
access to these menus.
is an illegal IP address.
. Meaning of
.
*
) and in