Processing Setting Dialog Box - Mitsubishi CR750-Q Series Instruction Manual

10.3. Processing Setting Dialog Box

Information required for processing is set using this dialog box. The table below explains the information
required for processing in details.
Posture/path
registration area
Operation procedure

Double-click the created path or select it and then click the [Edit] button in the Path tab to open the
Processing setting dialog box and edit the detailed information. The details are explained in the next
chapter.

Select unnecessary paths from the list and click the [Del] button.

Select a path and click the [Trial] button to check robot movement.

Select a path and calibration and then click the [Add to Flow] button to add them to the work flow.
Item
Processing name
Edge list
UP/DOWN
Fig. 10-4 Processing Setting Dialog Box
Table 10-3 Details of Operations in the Dialog Box
Displays the name of the path selected in the Work-flow dialog box.
When adding a new processing, the default name is set; the path name
can be modified by changing the information in this text box.
Displays segments constituting the path selected in the Path creation
dialog box as a list.
When the registered edge is double-clicked, it reverses.
Change the order of the segment list.
Click these buttons to move the position of the segment selected in the
segment list up/down.
51
Explanation