Executing Signal Simulation - Mitsubishi CR750-Q Series Instruction Manual

14.4. Executing Signal Simulation

To perform signal simulation, select the [Simple Simulation] option field button and click the [Start] button.
Simulation is executed using the set definitions.
Simulation status is displayed.
Display while simulation execution:
Display when simulation is stopped:
If the [Start] button is clicked when no definition is set, a dialog box for selecting a definition setting method
appears. Select a setting method and click [OK]. Definitions are loaded using the selected method and
simulation is started.
Tips
Starting simple simulation
Simple simulation is started when monitoring with MELFA-Works is started while I/O simulator
is displayed as well.
Fig. 14-7 Buttons Related to I/O Simulation
Fig. 14-8 New Definition Dialog Box
72