Mitsubishi CR750-Q Series Instruction Manual page 74


Set the signal numbers of the robot controller and the PLC device.
Select the signal types and the PLC device as well.
Defined signals are added to the list as shown in the figure below.
Item
Edit Edits a definition of connection with GX Simulator.
Delete Deletes the definition in the selected row.
It is also allowed to select multiple rows to delete them at once.
Move the definition of the selected row up or down.
It is also allowed to select multiple rows to move them at once.
Load Loads definitions of connection with GX Simulator from MELFA-Works project files.
Please be careful when performing this operation; current definitions displayed in the list
will be cleared.
Save Save the current definitions of connection with GX Simulator in project files of
MELFA-Works.
Specify a controller number in the
[Robot] input field.
Click the [...] button to display the
Select the Robot. dialog box and
select the appropriate controller
number from the dialog box.
Fig. 14-10 Signal Connection Settings
Fig. 14-11 Connection of Defined Signals
Table 14-2 Details of Operations in the Dialog Box
74
Explanation