Mitsubishi CR750-Q Series Instruction Manual page 13

Controller Memory
Standard 256K bytes
CRn-500
Extension 2M bytes
Standard 1M bytes
CRnQ-700
CRn750-Q
‐
Standard 1M bytes
CRnD-700
Extension 4M bytes
CRn750-D Standard 3M bytes
* Operating time varies depending on the job conditions.
Table 1-6 Relation CAD link function and Robot Version
Operating time
Approx. 17 sec
Approx. 160 sec
Approx. 85 sec
Non-supported
Approx. 85 sec
Approx. 320 sec
Approx. 255 sec
13
Remarks
Before K6 Non-supported CAD link function
K7 Non-supported extension memory
Since K8 Supported extension memory
Correspondence from first edition.
P6 Non-supported extension memory
Since P7 Supported extension memory
Correspondence from first edition.