Mitsubishi CR750-Q Series Instruction Manual page 18


The following screens are displayed. Then click [Run].
The installation of this application is started.
Memo
When the installation launcher doesn't start
(A) If the setup dialog box does not appear when you insert the product in the CD-ROM
drive, display the setup launcher according to the following procedure.
 Click the [Start] button and then select [Run...].
 Check the CD-ROM drive name and enter "drive name":/index.html
(e.g., if the CD-ROM drive is "D:," type "D:/index.html").
(B) Please install RT ToolBox2 and MELFA-Works by the method of the following when the
installation cannot begin from the setup launcher.
 Click the [Start] button and then select [Run...].
 Check the CD-ROM drive name and enter "drive name":/RT ToolBox2/Setup.exe
(e.g., if the CD-ROM drive is "D:," type "D:/RT ToolBox2/Setup.exe").
The setup is begun.
 As well as  after completing the setup of RT ToolBox2
enter "drive name":/MELFA-Works/Setup.exe (e.g., if the CD-ROM drive is "D:," type
"D:/MELFA-Works/Setup.exe").
The setup is begun.
Fig. 2-4 Security Warning 2
18