Show Authen_Policy; Config Authen Application - D-Link DGS-1100-06/ME Cli Reference Manual

DGS-1100-06/ME:5#disable authen_policy
Command: disable authen_policy
Success.
DGS-1100-06/ME:5#

show authen_policy

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the system access authentication policy:
DGS-1100-06/ME:5#show authen_policy
Command: show authen_policy
Authentication Policy : Disabled
DGS-1100-06/ME:5#

config authen application

Purpose
Syntax
Description
Parameters
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the system access authentication policy status on
the Switch.
show authen_policy
The show authen_policy command display the system access
authentication policy status on the Switch.
None.
None.
To configure various applications on the Switch for authentication
using a previously configured method list.
config authen application [console | http | all] [login | enable]
[default | method_list_name <string 15>]
The config authen application command configures Switch
applications (console, Telnet) for login at the user level and at the
administration level (authen_enable), utilizing a previously
configured method list.
application – Specifies the application to configure. One of the
following four options may be selected:

console – Configures the command line interface login
method.

http – Configures the http login method.

all – Configures all applications as (console, Telnet, SSH)
login methods.
login – Configures an application for normal login on the user level,
using a previously configured method list.
enable – Configures an application for upgrading a normal user level
to administrator privileges, using a previously configured method list.
default – Configures an application for user authentication using the
221