Show Autoconfig; Show Config - D-Link DGS-1100-06/ME Cli Reference Manual

Restrictions
Example usage:
To stop the auto configuration function:

show autoconfig

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the autoconfig status:

show config

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the autoconfig status:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Only Administrator-level users can issue this command. .
DGS-1100-06/ME:5# disable autoconfig
Command: disable autoconfig
Success.
DGS-1100-06/ME:5#
Used to display the current autoconfig status of the Switch.
show autoconfig
The show autoconfig command is used to list the current status of
the auto configuration function.
None.
None.
DGS-1100-06/ME:5# show autoconfig
Command: show autoconfig
Autoconfig State: Enabled
DGS-1100-06/ME:5#
To display the current or saved version of the configuration settings
of the Switch.
show config [[config_in_nvram config_id <value 1-2>] |
current_config] [begin | exclude] <string 80>
The show config command is used to list the current status of the
configuration settings of the Switch.
config_in_nvram config_id <value 1-2> − Display the system
configuration from NV-RAM.
current_config − Display system configuration from the DRAM
database, i.e. the current system setting.
[begin | exclude] − Display the configuration which is begined or
excluded.
<string 80> − Display the configuration which begin or exclude the
specified string. The maximum string is 80.
None.
15