Show Ethernet_Oam Ports (Statistics) - D-Link DGS-1100-06/ME Cli Reference Manual

To show Ethernet OAM configuration on port 2:
DGS-1100-06/ME:5# show ethernet_oam ports 2 configuration
Command: show ethernet_oam ports 2 configuration
Port 2
-----------------------------------------------------------
OAM
Mode
Critical Event
Remote Loopback OAMPDU
Symbol Error
Notify State
Window
Threshold
Frame Error
Notify State
Window
Threshold
Frame Period Error
Notify State
Window
Threshold
Frame Seconds Error
Notify State
Window
Threshold
DGS-1100-06/ME:5#

show ethernet_oam ports (statistics)

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
: Disabled
: Active
: Enabled
: Enabled
: 625000000 milliseconds
: 1 Errored Symbol
: Enabled
: 10 milliseconds
: 1 Errored Frame
: Enabled
: 10000000 Frames
: 1 Errored Frame
: Enabled
: 100 milliseconds
: 1 Errored Seconds
Used to display Ethernet OAM statistics for ports.
show ethernet_oam ports [all | <portlist>] statistics
The show ethernet_oam ports command is used to display
Ethernet OAM ports statistics information.
[all | <portlist>] – Specifies a range of ports or all ports to display
status.
None.
: Not Processed
258