Delete Snmp Community - D-Link DGS-1210/ME series Reference Manual

Parameters
Restrictions
Example usage:
To create the SNMP community string 'dlink:'
DGS-1210-28P/ME:5# create snmp community dlink view dlink read_only
Command: create snmp community dlink view dlink read_only
Success.
DGS-1210-28P/ME:5#

delete snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string 'dlink':
DGS-1210-28P/ME:5# delete snmp community dlink
Command: delete snmp community dlink
Success.
DGS-1210-28P/ME:5#
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
accessible to the SNMP community.
Read/write or read-only level permission for the MIB objects
accessible to the SNMP community.
<community_string 32> − A string of up to 32 alphanumeric
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
<username 32> − A string of up to 32 alphanumeric characters that
is used to identify the group of MIB objects that a remote SNMP
manager is allowed to access on the Switch.
<view_name 32> − A string of up to 32 alphanumeric characters that
is used to identify the view name.
[read_only | read_write] – Allow the above community string user to
have read-only or read-write access to the switch's SNMP agent.
The default is read-only.
Only administrator, operate or power user-level users can issue this
command.
To remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
The delete snmp community command removes a previously
defined SNMP community string from the Switch.
<community_string 32> − A string of up to 32 alphanumeric
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch's SNMP agent.
Only administrator, operate or power user-level users can issue this
command.
84