Create Snmp Community; Delete Snmp Community - D-Link DGS-3100 Series Cli Manual

Gigabit stackable managed switch
Hide thumbs Also See for DGS-3100 Series:
Table of Contents

Advertisement

create snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the SNM

delete snmp community

Purpose
Syntax
Description
Parameters
To create an SNMP community string to define the relationship
between the SNMP manager and an SNMP agent.
create snmp
<view_name 30> [read_only | read_write]
The create snmp community command creates an SNMP
community string and assigns a
community string. The commu
permit access to the agent on the S
following characteristics can be associated with the community
string:
An Acce
ss List of IP addresses of SNMP managers that are
permitted to use the community string to gain access to the Switch's
SN
MP agent.
An MIB view that defines the subset of all MIB objects to be
accessible to the SNMP community.
Read/write
accessible
<community_string 20> − A string of up to 20 alphanum
characters that is used to identify memb
This string is used like a
access to MIB objects in the Switch's SNMP agent.
<view_name 30> − A string of up
is used
to identify the group of MIB objects that a remote SNMP
manager i
s allowed to access on the Switch.
ly − Specifies that SNMP community members using the
read_on
community string created with this command can only read the
contents of the MIBs on the Switch.
read_write − Specifies that SN
community string created
write to the contents of the MIBs on the Switch.
Only administrator-leve
P community
string "dlink:"
DGS3100# create snmp community dlink view ReadView read_write
Success.
DGS3100
#
To remove a specific SNMP community string from the Switch.
delete snmp community <community_string 2
The delete snmp community command removes a previously
defined SNMP community string from the Switch.
<community_string 20> − A string of up to 20 alphanumeric
community <community_string 20> view
nity string acts like a password to
or read-only level permission for the MIB objects
to the SNMP community.
password to give remote SNMP managers
MP community members using the
with this command can read from and
l users can issue this command.
33
ccess-limiting characteristics to this
witch. One or more of the
ers of an SNMP commu
to 30 alphanumeric characters that
0>
eric
nity.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents