Delete Snmp Group; Show Snmp Groups - D-Link DGS-1100-06/ME Cli Reference Manual

delete snmp group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named 'sg1':
DGS-1100-06/ME:5#delete snmp group sg1 v3 auth_priv
Command: delete snmp group sg1 v3 auth_priv
Success!
DGS-1100-06/ME:5#

show snmp groups

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
DGS-1100-06/ME:5#show snmp groups
Command: show snmp groups
SNMP Group Table
Group Name Read View Write View Notify View Security Model Security Level
------------------ -------------- ---------------- --------------- ---------------------- -----------------
sg1
ReadOnly
ReadOnly
ReadWrite ReadWrite
ReadWrite ReadWrite
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
To remove an SNMP group from the Switch.
delete snmp group <groupname 32> [v1 | v2c | v3 [auth_priv |
noauth_nopriv]]
The delete snmp group command removes an SNMP group from
the Switch.
<groupname 32> − A string of that identifies the SNMP group the
new SNMP user will be associated with. Up to 32 alphanumeric
characters.
Only administrator or operate-level users can issue this command.
To display the group-names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group
are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
None.
df df
ReadWrite ---
ReadWrite ---
ReadWrite ReadWrite
ReadWrite ReadWrite
d v3
ReadWrite v1
ReadWrite v2c
v1
v2c
49
AuthPriv
NoAuthNoPriv
NoAuthNoPriv
NoAuthNoPriv
NoAuthNoPriv