Pneumatic Data; Construction; Controller; Explosion Protection - Siemens SIPART PS2 Operating Instructions Manual

Technical data

13.5 Explosion protection

13.2

Pneumatic data

See also
Lever for position detection (Page 107)
13.3

Construction

13.4

Controller

Controller
Control unit
● Five-point controller
● Dead zone
dEbA = auto
dEbA = 0.1 ... 10 %
Analog-to-digital converter
● Scanning time
● Resolution
● Transmission error
● Temperature influence
13.5 Explosion protection
13.5.1

Breakdown of the article numbers

Each device has a nameplate. This nameplate shows a specific article number for the device.
Lower-case letters are used and explained in the tables below for the variable digits in the
article number. Each variable that is used stands for a different order version. You will find the
order data in the FI 01 catalog on the Internet.
Table 13-1
282
Article number
Adaptive
Adaptive
Can be set as fixed value
10 ms
≤ 0,05 %
≤ 0,2 %
≤ 0.1 %/10 K (≤ 0.1 %/18 °F)
Operating Instructions, 05/2019, A5E00127926-AC
SIPART PS2 with PROFIBUS PA