Changing The Operating Mode - Siemens SIPART PS2 Operating Instructions Manual

6.2.2

Changing the operating mode

The following picture illustrates the available operating modes and switching between the
operating modes.
Operating mode
P manual mode
Change position using:
Configure
Change parameter
name using:
Change value using:
Manual mode
Change position using:
Automatic mode
Diagnostics
Figure 6-3
See also
Display (Page 97)
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC
Position of
potentiometer [%]
Not initialized
Parameter value
Parameter number
or +
Parameter name
Position[%]
Error code
Mode and
setpoint [%]
Position [%]
Error code
Mode and
setpoint [%]
Diagnostics value
+
Diagnostics number
Diagnostics name
Switching between the operating modes
Display (1)
> 5 s
> 5 s
1 x
+ +
> 2 s > 2 s
+
> 2 s
6.2 Operating modes
> 5 s
> 5 s
> 2 s
1 x
Operation
101