Siemens SIPART PS2 Operating Instructions Manual page 342

Electropneumatic positioner with profibus pa

Hide thumbs Also See for SIPART PS2:

Table of Contents

E.5 Booster mounting, flameproof enclosure

3. Tighten the locking screw

4. Check that the extension shaft sits properly.

5. Screw the 4 threaded bolts

6. Turn the threaded bolts

at the flat end of the positioner shaft.

into the 4 holes

at least 5 to max. 9 full revolutions into the hole

SIPART PS2 with PROFIBUS PA

Operating Instructions, 05/2019, A5E00127926-AC