Table of Contents
Advertisement
50/93
Bosch Rexroth AG
Module Design
STOP Button of the Hand-Held Terminals IndraControl VEH 30.1, VEH 30.2 or VCH 08.1
6.2.8
Pushbuttons on the VAM12.1-PB-NF-NN-TB-VD-NN-1608-NN and
VAM42.1-PB-NF-NN-TB-VD-NN-1608-NN
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
The connection module for the hand-held terminals VEH 30.1, VEH 30.2 or
VCH 08.1 is equipped with an automatic STOP circuit jumpering. Thus, the
operator can connect or disconnect the hand-held terminals IndraControl VCH
08.1, VEH 30.1 or VEH 30.2 via the connection module without causing an
unintended stopping of the installation.
NOTICE
Before commissioning the IndraControl VEH 30.1, VEH 30.2 or VCH 08.1 ob‐
serve that the STOP button is NOT pressed.
For more detailed information about the safety concept and the
connection of the stop and enabling circuits of the IndraCon‐
trol VEH 30.1, VEH 30.2 or the VCH 08.1, please refer to the
documentations for the hand-held terminals IndraControl VEH 30.1
(DOK-SUPPL*-VEH*30.1***-PR02-EN-P), IndraControl VEH 30.2
(DOK-SUPPL*-VEH*30.2***-PR01-EN-P)
VCH 08.1 (DOK-SUPPL*-VCH*08.1***-PR01-EN-P).
The VAM 42.1 features six pushbuttons. The VAM 12.1 features four pushbut‐
tons. There are no no. 3 and no. 6 pushbuttons.
Fig.6-13:
Equipment of the pushbuttons
No.
Actuators
1
Color: White, illuminated
2
Color: White, illuminated
3 (not for VAM 12.1) Color: White, illuminated
4
Color: Red, not illuminated
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Shutdown of the plant due to connecting an In‐
draControl VEH 30.1, VEH 30.2 or VCH 08.1
with pressed STOP button.
1
2
3
4
5
6
Switching element
1 N/O contact
1 N/O contact
1 N/O contact
1 N/C contact
or
IndraControl
Advertisement
Table of Contents
