Table of Contents
Advertisement
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
7.9.7
Personality Function
In the majority of cases, the plant features a continuous Ethernet network.
However, M-keys, STOP buttons or enabling buttons are firmly assigned to one
control. The STOP button and the enabling button are firmly wired to the con‐
nection module VAC 30.2 (= the VAM connection module). The network data
of the IndraControl VEH 30.1, 30.2 or VCH 08.1 as well as the IP address of
the control are saved in the VAC 30.2 connection module via the memory func‐
tion.
Thus, different sections of a plant can be visualized by means of one Indra‐
Control VEH 30.1, VEH 30.2 or VCH 08.1 via several IndraControl VAC 30.2
connection modules. With each change of the plug-in location, the IndraCon‐
trol VEH 30.1, VEH 30.2 or the VCH 08.1 gets e. g. a new target IP address or
UDP address.
The IndraControl VEH 30.1, VEH 30.2 or VCH 08.1 applies the network settings
that are read out from the VAC 30.2 connection module after every restart.
These settings can be adjusted in the "Rexroth settings" of the IndraControl
VEH 30.1, VEH 30.2 or VCH 08.1 hand-held terminals. These settings are
saved in the IndraControl VAC 30.2.
The configuration of the Ethernet interface is described in the doc‐
umentations of the hand-held terminals IndraControl VEH30.1
(DOK-SUPPL*-VEH*30.1***-PR02-EN-P), IndraControl VEH 30.2
(DOK-SUPPL*-VEH*30.2***-PR01-EN-P)
VCH 08.1 (DOK-SUPPL*-VCH*08.1***-PR01-EN-P).
Bosch Rexroth AG
69/93
Interfaces
or
IndraControl
Advertisement
Table of Contents
