X81: Connection For External Hand-Held Terminal; General Information; Pin Assignment - Bosch Rexroth VAM 10.2 Project Planning Manual

44/69 Bosch Rexroth AG
Interfaces
8.6

X81: Connection for external hand-held terminal

8.6.1

General information

8.6.2 Pin assignment (25-pin female connector strip, D-SUB
Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
Apart from the inputs for the handwheel of the hand-held terminal (A, /A,
B, /B), 12 inputs (IN0 – IN11) are available for the hand-held terminal keys.
The keys are supplied via the "+24 V" supply via connector X81.
The "+24 V" supply is internally generated by the supply "U
be used to connect the keys of the hand-held terminal. The X81 connection
for the hand-held terminal is located on the logic circuit board.
The states of the inputs and the counter value of the handwheel are transmit‐
ted to the master control via Profibus DP.
The module configuration and the address assignment are descri‐
bed in chapter 9 "Commissioning" on page
13
25
Fig. 8-9: X71 plug
DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
" and may only
L
47.
1
14