Table of Contents
Advertisement
30/93
Bosch Rexroth AG
Technical Data
4.4
VAC 30.2 Connection Module for VEH 30.1, VEH 30.2 or
VCH 08.1 Hand-Held Terminal
4.5
Euchner EKS, Electronic-Key-System
4.5.1
Technical Data
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
Connections
Material
Prescribed external protec‐
tion:
Fig.4-7:
Connection module for VEH 30.1, VEH 30.2 or VCH 08.1 hand-held
terminal
For further information on the safety functions of the VEH 30.1, VEH 30.2 or
VCH 08.1 hand-held terminals, please refer to the relevant documentation
(DOK-SUPPL*-VEH*30.1***-PR02-EN-P, DOK-SUPPL*-VEH*30.2***-PR01-
EN-P or DOK-SUPPL*-VCH*08.1***-PR01-EN-P).
General parameters
Voltage supply
Current consumption
Interface, data transmission
Interface to the PC
Transmission protocol
Data transmission rate
Connection type USB interface
Cable length
LED display
Fig.4-8:
Technical data EKS-FSA
Parameters of the semiconductor relay outputs LA and LB
Voltage supply for load U (LA, LB)
Switching current per output
Number of uses of the overload protection Typ. 100
Output voltage High for U (LA, LB)
Resistance in switched-on state
Capacity per output
Additional capacitive load per output
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
●
1 × Ethernet connection (RJ 45, 10/100 base-T)
●
STOP button hand-held terminal
●
Enabling button, hand-held terminal
●
Voltage supply 24 V hand-held terminal (see In‐
draControl VEH 30.1, VEH 30.2 or VCH 08.1)
Metal cover: V2A
2-A-fusible cut-out, time-lag
Via USB interface
100 mA
USB Full Speed (USB 1.1 and USB 2.0
compatible)
3964R
9.6 kbaud
Female connector, type B
3 m max.
Green: "Stand by" (in operation)
Yellow: "Electronic-Key is active"
Typ. 24 V, max. 30 V
Min. 1 mA, max. 50 mA
Min. 0.9 × U and max. U [V]
35 Ohm
Max. 2 nF
Max. 1 nF
Advertisement
Table of Contents
