60/93
Bosch Rexroth AG
Interfaces
7.5.3
Characteristics of the Digital Inputs
7.5.4
Characteristics of the Digital Outputs
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
Input types
Number of inputs
Status display by LED
Electrical isolation
Reverse voltage protection
Plug-in pin spacing
Fig.7-13:
Characteristics of the digital inputs
Output type
Number of outputs
Status display by LED
Electrical isolation
Reverse voltage protection
Output voltage
Nominal value
Rated output current
Nominal value:
UL rating:
Simultaneity factor
Plug-in pin spacing
Fig.7-14:
Characteristics of the digital outputs
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Type 1, according to EN 61131-2
16
Green
Yes (to logic supply)
Yes
3.5 (Weidmüller terminal)
Semiconductor outputs, non-saving;
protected, with automatic restart, current-carrying
8
Green
Yes (to logic supply)
Only guaranteed without load connection
Defect of the device caused by
●
polarity reversal with simultaneous short-cir‐
cuit of the output lines,
●
polarity reversal with simultaneous connection
of externally polarized suppressor diodes at
the output lines
●
Applying an external voltage > U
24 V
0.2 A
0.2 A general purpose
5 W Tungsten
100 %
3.5 (Weidmüller terminal)
Q