Table of Contents
Advertisement
40/93
Bosch Rexroth AG
Dimensions and Installation
5.4.4
VAM 42.1 Rear View
5.5
Housing Dimensions VAM 42.1, Customized Variant
5.6
Installation
5.6.1
Installation Notes
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
Flat seal
M5
Fig.5-9:
Housing dimensions VAM 42.1, rear view
The dimensions of the customized variant differ only in the depth for VAM 42.1.
Fig.5-10:
Housing dimensions VAM42.1-PB-NF-AB-TB-VD-EK-1608- D1 and
VAM42.1-PB-NF-AB-TB-NN-EK-1608- D1, top view
●
When installing the control panel, ensure an ergonomic operation. Addi‐
tionally, ensure that all machine components can be seen by the operator!
●
Avoid installation locations exposed to direct sunlight, as additional heat
development can occur.
●
Install the control panel in a manner ensuring easy access to the front
panel (top side).
●
Ensure that the LED displays on the front panel are visible.
●
Provide a sufficient minimum clearance of 50 mm for cooling and cable
routing behind the device.
●
Lay all connecting cables in loops and use strain reliefs for all cables.
●
Keep as much distance as possible to noise sources.
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
380 Mounting cut-out
Advertisement
Table of Contents
