Ce Marking; Declaration Of Conformity - Bosch REXROTH IndraControl VAM 42.1 Project Planning Manual

32/93 Bosch Rexroth AG
Technical Data
4.7.2

CE Marking

Declaration of Conformity

Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
Standard Meaning
EN 60204-1 Electrical equipment of machines
EN 60 61000-6-4 Generic standard, emitted interference (industrial environ‐
ment)
EN 60 61000-6-2 Generic standard, noise immunity (industrial environment)
EN 61558-2-6 Transformer for 24 V power supply unit, protective separa‐
tion
EN 60664-1 Overvoltage category II
EN 61 131-2 24 V outputs requirements
EN 61 131-2 24 V current supply requirements
EN 60950 Clearances and creepage distances office (environment)
and power units
ISO 13850 Safety of machinery, emergency stop principles for design
EN 60 529 Degrees of protection (including housings and installation
compartments)
EN 60 068-2-6 Vibration test
EN 60068-2-27 Shock test
EN 60721-3-3 Classification of ambient conditions
EN 60721-3-2 Classification of ambient conditions
EN 60721-3-1 Classification of ambient conditions
DIN EN 61 131-2 Programmable logic controllers
Equipment and tests requirements
UL 508 Industrial Control Equipment
Fig.4-11: Used Standards
The electronic products described in this project planning manual comply with
the requirements and goals of the following EU directives and with the harmon‐
ized European standards:
EMC Directive 2004/108/EC
The electronic products described in this project planning manual are intended
for the use in industrial environments and comply with the following require‐
ments:
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P