Table of Contents
Advertisement
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
1
System Presentation
1.1
Brief Description
1.2
VAM 12.1/VAM 42.1 Standard Variants
1.2.1
Standard Variants Overview
1.2.2
Rear Side
Machine control panels complete operator and visualization terminals and are
used to select the operation modes as well as to operate the machine manually.
The machine control panels feature operating elements, e. g. keys with LED
displays, rotary switches for feed and spindle override, EMERGENCY STOP
button, cut-outs for 22.5 mm control and indicator units as well as a connection
for a hand-held terminal.
The VAM 12.1/VAM 42.1 machine control panels have been specially designed
for the use in combination with devices of the VPB, VPP, Vxx product family
and are adapted to the design of these devices. The VAM 12.1 width corre‐
sponds to the VSP 16 width. The VPP 16 and VAM 42.1 width corresponds to
the VSP 40 and VPP 40 width.
VAM devices are machine operator panels for CNC machines with PROFIBUS
connection.
The VAM 12.1/VAM 42.1 machine control panels feature the following ele‐
ments:
2 keypads
with keys that
might be free‐
ly labeled and
programmed
VAM 12.1
30 illuminated
keys
VAM 42.1
30 illuminated
keys
Fig.1-1:
VAM 12.1/VAM 42.1 Standard Variants
The following components are located on the rear side of the VAM 12.1/
VAM 42.1:
●
A 25-pin connector for connecting a hand-held terminal (e.g. Euchner HBA
098404)
●
6-pin connector to connect a handwheel
●
16 digital 24 V inputs.
Bosch Rexroth AG
Cut-outs for
Further elements
mounting
22.5 mm
control and
indicator
units
9 cut-outs
●
EMERGENCY
STOP button
●
4 pushbuttons
●
2 rotary switches
for feed and spin‐
dle override
10 cut-outs
●
EMERGENCY
STOP button
●
6 pushbuttons
●
2 rotary switches
for feed and spin‐
dle override
7/93
System Presentation
Order number
and type desig‐
nation code
R911171651
VAM12.1-PB-
NF-NN-TB-VD-
NN-1608-NN
R911171654
VAM42.1-PB-
NF-NN-TB-VD-
NN-1608-NN
Advertisement
Table of Contents
