Table of Contents
Advertisement
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
6.2.3
Override VD
Two keypads, each with 15 keys, are available. The keys are short-stroke keys
that can be configured and labeled freely. The keys are covered by a foil ar‐
ranged in a matrix containing three columns and five rows. Each key is illumi‐
nated by a green point LED.
There are plastic separators between the keys preventing the user from acci‐
dential key activation.
The module is connected to the logic circuit board via the internal shift register
bus. The states of the pushbuttons are transmitted to the master control via
PROFIBUS DP. The LEDs are triggered via PROFIBUS DP by the master con‐
trol.
The module configuration and the address assignment are descri‐
bed in
chapter 8 "Maintenance and Commissioning" on page
71.
The Override VD module is available in all housing variants with the abbrevia‐
tion "VD" in the type designation code!
Fig.6-4:
Override rotary switch
This module slot is equipped with two override rotary switches by default.
Bosch Rexroth AG
IndraControl V
45/93
Module Design
Advertisement
Table of Contents
