88
5.9
Menu item Machine config
The menu item Machine config allows you to determine
the basic settings for the machine which apply to all programs.
In this menu item, the following sub-items are available for
selection:
• Load.pos ( p. 88)
• Zig-zag ( p. 90)
• Thread mon. ( p. 92)
• Cut. time ( p. 93)
• E-group ( p. 94)
• Threading mode ( p. 96)
• Operation mode ( p. 98)
• Tension data ( p. 99)
• Multiflex ( p. 101)
5.9.1
Load.pos
In the sub-item Load.pos. you can set the desired loading
position.
Parameters in the Load.pos sub-item
Icon
Entry
Load.pos
To adjust the loading position:
1.
Select Machine config in the service menu ( p. 82).
2.
Press the
The following appears on the display:
Possible
Meaning
Value range
Loading
0-68
position:
Distance from
the cutting point
button.
Operating Instructions 581 - 02.0 - 05/2019
Programming
Preset value
68