Programming
Operating Instructions 581 - 02.0 - 05/2019
5.11 Menu item Test functions
WARNING
Risk of injury from sharp and moving parts!
Puncture, cutting or crushing possible.
Exercise the utmost caution when performing
tests when the machine is running.
In the menu item Test functions you can perform function
tests on the input and output elements, check the sewing process
and retrace events.
In this menu item, the following sub-items are available for
selection:
• Multi test ( p. 111)
• Sewing process ( p. 119)
• Events ( p. 125)
The sub-items have further sub-items.
5.11.1 Multi test
In the sub-item Multi test you can use the software to test
whether specific elements are functioning. Additional measuring
equipment is not required.
To select the sub-item Multi test:
1.
Select Test functions in the service menu ( p. 82).
2.
Press the
The following appears on the display:
button.
111