Activating And Deactivating Threading Mode - DURKOPP ADLER 581 Operating Instructions Manual

22
4.3 Activating and deactivating threading
mode
Threading mode can be used to thread needle thread, hook
thread, and gimp thread.
Fig. 6:

Activating and deactivating threading mode

①
(1) - Button for threading mode
Activating threading mode
To activate threading mode:
1. Press the button (1) on the head cover. The button must
engage.
 The machine is in threading mode.
The button lights up.
The fabric support plate moves into the best position for
threading.
The fabric clamps remain in the position they were in when
threading mode was switched on.
The sewing drive is separated from the power supply.
The slitting blade is switched off.
 You can now:
• insert the needle
• thread the hook thread
• thread the needle thread
• thread the gimp thread
Operating Instructions 581 - 02.0 - 05/2019
Operation