DURKOPP ADLER 581 Operating Instructions Manual page 34

32
7. Thread the hook thread through the hole (4) and insert it
into the loop of the threading wire (7).
8. Pull the threading wire (7) with the hook thread out of the
hole (8).
OR
Use compressed air to blow the hook thread through guide (6).
9. Remove the clamping plates.
Fig. 16: Threading the hook thread (4)
⑦
(8) - Hole
(7) - Threading wire
10. Slide the threading wire (7) through the guide (9).
11. Feed the hook thread through the hole (8) and insert it into
the loop of the threading wire (7).
(9) - Guide
Operating Instructions 581 - 02.0 - 05/2019
Operation
⑨
⑧