66
2.
Press the
The cursor flashes.
3.
Select the desired buttonhole number using the
buttons
or
As a selection aid, the current buttonhole shape (1) and
the most important corresponding values (2) are displayed.
4.
Confirm the selection with the
5.2.3
Sequential mode
Depending on the setting, the machine will be in either automatic,
manual or light barrier mode ( p. 63). In sequential mode you
can switch between programmed buttonholes in the sequence at
any time, unless you are working in light barrier mode.
There are 2 steps for selecting a buttonhole in sequential mode:
Order
1.
Select a sequential number.
2.
Select a buttonhole.
Fig. 47: Sequential mode
①
(1) - Buttonhole shape
(2) - Values
button.
.
(3) - Sequence
(4) - Sequential number
Operating Instructions 581 - 02.0 - 05/2019
Programming
button.
④
③
②