Sequence Programming - DURKOPP ADLER 581 Operating Instructions Manual

78
5.4

Sequence programming

The sequences are programmed on the S level.
Important
Once you press the
To program a sequence:
1. Press the
 The setting mode for the individual sequences is started.
2. Use the button to navigate to the Sequential number
field ( p. 66).
3. Press the
 The following appears on the display:
Fig. 52: Programming sequences (1)
①
(1) - Position within the sequence
(2) - Buttonhole number
4. Select the desired sequential number using the
buttons or
5. Press the
 The following appears on the display:
button, you can no longer sew!
button.
button.
②
(3) - Number of buttonholes
.
button.
Operating Instructions 581 - 02.0 - 05/2019
Programming
③