Buttonhole Programming - DURKOPP ADLER 581 Operating Instructions Manual

72
5.3

Buttonhole programming

The buttonholes are programmed on the P level.
The respective characteristics of the buttonhole, e.g. buttonhole
length and eye shape, can be set for all bartack forms.
Important
Once you press the
Important
If you change the bartack form of a buttonhole program, all values
of this buttonhole are reset to the preset value.
Information
Not all buttonhole shapes and variants can be sewn with every
subclass or item of sewing equipment.
To program a buttonhole:
1. Press the
 The setting mode for the individual buttonholes is started.
2. Using the button
number ( p. 65).
3. Press the
4. Select the desired buttonhole number using the
buttons or
5. Press the
6. Using the buttons
7. Press the
8. Select the desired bartack using the buttons
button, you can no longer sew!
button.
, navigate to the field Buttonhole
button.
.
button.
or select the bartack form
button.
Operating Instructions 581 - 02.0 - 05/2019
Programming
.
or .