162
All moving parts in the machine are lubricated via an oil-wick
system from 2 oil reservoirs.
Lubricating the machine
Lubricate the machine as follows:
1.
Unscrew the head and side covers.
Fig. 105: Lubricating the machine (1)
①
②
(1) - Wick
(2) - Wick
2.
Soak wicks (1) and (2) with a little oil.
3.
Add 1-2 drops of oil to the pendulum sleeve and needle bar (3).
4.
Tighten the head and side covers on.
(3) - Needle bar
Operating Instructions 581 - 02.0 - 05/2019
Setup
③