Pre-Delivery Preparation - Genie S-40 Service Manual

Pre-Deliver Pre-Deliver
Pre-Deliver y Preparation Pre-Deliver Pre-Deliver
Fundamentals
It is the responsibility of the dealer to perform the

Pre-delivery Preparation.

The Pre-delivery Preparation is performed prior to each
delivery. The inspection is designed to discover if
anything is apparently wrong with a machine before it is
put into service.
A damaged or modified machine must never be used.
If damage or any variation from factory delivered
condition is discovered, the machine must be tagged
and removed from service.
Repairs to the machine may only be made by a
qualified service technician, according to the
manufacturer's specifications.
Scheduled maintenance inspections shall be performed
by qualified service technicians, according to the
manufacturer's specifications and the requirements
listed in the responsibilities manual.
Terex South Dakota, Inc USA
500 Oak Wood Road
PO Box 1150
Watertown, SD 57201-6150
(605) 882-4000
Copyright © 2011 Terex Corporation. Genie® is a registered trademark of Terex South Dakota, Inc.
133192 Rev D
y Preparation y Preparation
y Preparation y Preparation
Genie UK
The Maltings, Wharf Road
Grantham, Lincolnshire
NG31- 6BH England
(44) 1476-584333
Instructions
Use the operator's manual on your machine.
The Pre-delivery Preparation consists of completing
the Pre-operation Inspection, the Maintenance items
and the Function Tests.
Use this form to record the results. Place a check in
the appropriate box after each part is completed.
Follow the instructions in the operator's manual.
If any inspection receives an N, remove the machine
from service, repair and reinspect it. After repair, place
a check in the R box.
Legend
Y = yes, completed
N = no, unable to complete
R = repaired
Comments
Pre-Delivery Preparation
Pre-operation inspection
completed
Maintenance items completed
Function tests completed
Model
Serial number
Date
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Y N R