Panasonic FP2 ET-LAN Technical Manual page 272

Address Name
232H Default router
(Gateway) IP
address (L)
233H Default router
(Gateway) IP
address (H)
234H Number of
registering router
235H Router 1 network
(subnetwork)
address (L)
236H Router 1 network
(subnetwork)
address (H)
237H Router 1 Router
IP address (L)
238H Router 1 Router
IP address (H)
15-10
Default Set value and explanation
0000H [Set value] Default router (gateway) IP address
- This is effective as long as the network (subnetwork) mask field is
anything other than 0.
- If the default router (gateway) IP address has been set,
0000H
communication will be carried out through the default router
(gateway) without an error occurring even if the class, network
address, or subnetwork address is different from that of the partner
node.
- The network (subnetwork) address for the default router (gateway) IP
address must be identical to the network (subnetwork) address for
the source node IP address. If they are different, an error will occur.
- 00000000H and FFFFFFFFH will cause errors to occur.
0000H [Set value] 0 to 5
- This specifies the number of routers used on the source network.
- The default router (gateway) is not included in the number of
registered routers.
- This is effective as long as the network (subnetwork) mask field is
anything other than 0.
- Any value higher than 5 will be treated as 5.
- The number of network addresses and router IP addresses registered
should not exceed the number specified here.
0000H [Set value] Network (subnetwork) address of partner node
- This specifies the network (subnetwork) address for an adjacent
network connected through the router.
- 00000000H and FFFFFFFFH will cause errors to occur.
0000H
0000H [Set value] Router IP address
- The network (subnetwork) address for the router address must be
identical to the network (subnetwork) address for the source node IP
0000H
address. If they are different, an error will occur.
- 00000000H and FFFFFFFFH will cause errors to occur.