Reading E-Mail Logs - Panasonic FP2 ET-LAN Technical Manual

11.10.3 Reading E-mail logs

- Contents of the send log block
Send log blocks can be registered in the e-mail send log area.
-
A newer e-mail send log is continuously registered in the starting send log block. When the number of
-
the send log block exceeds 32, the older log that is stored in the e-mail send log area's last block is
overwritten.
Send log blocks (Bank:11H Address:0000H-01FFH)
Offset address Name
0 (L) Date (Min.)
0 (H) Date (Time)
1 (L) Date (Day)
1 (H) Date (Month)
Send e-mail
2
identification No.
3 Reserved
Specifying "To"
4 (Higher 16 bits)
Nos. 1－16
Specifying "To"
5 (Lower 16 bits)
Nos. 17－32
Specifying "Cc"
6 (Higher 16 bits)
Nos. 1－16
Specifying "Cc"
7 (Lower 16 bits)
Nos. 17－32
Specifying "Bcc"
8 (Higher 16 bits)
Nos. 1－16
Specifying "Bcc"
9 (Lower 16 bits)
Nos. 17－32
A-F Reserved
- Contents of the receive log block
Receive log blocks can be registered in the e-mail receive log area.
-
A newer e-mail receive log is continuously registered in the starting receive log block. When the
-
number of the receive log block exceeds 32, the older log that is stored in the e-mail receive log
area's last block is overwritten.
Receive log blocks (Bank:11H Address:0200H-03FFH)
Offset address Name
0 (L) Date (Min.)
0 (H) Date(Time)
1 (L) Date (Day)
1 (H) Date (Month)
2-E From
F Error code
Note:
1. When the e-mail source address is indicated in more than 27 characters, the characters later than the
th
27 character are omitted.
Description
Date and time when e-mail is sent.
The send e-mail message No.
Reserved (Used in the system.)
E-mail address No. set for "To" is stored using the bit data.
E-mail address No. set for "Cc" is stored using the bit data.
E-mail address No. set for "Bcc" is stored using the bit data.
Reserved (Used in the system.)
Description
Date and time when e-mail is received.
E-mail source address (ASCII 26 characters) of the received
Note1
e-mail.
11-25