Unit Type; Structure Of Network - Panasonic FP2 ET-LAN Technical Manual

E-mail send and receive functions (for a standard equipment)
Sending e-mails
Errors occurred in the programmable controller can be notified via e-mail.
-
E-mails can be sent at the specified time.
-
The devices of programmable controller are monitored and e-mails can be sent when the designated
-
conditions are satisfied.
Receiving e-mails
Receiving an e-mail described in a specific format enables to notify the status of the programmable
-
controller via e-mail.
A broad range of self-diagnosis functions
A function that checks the hardware and the communication status during operation.
-
A function that checks the hardware and the communication status when the test mode is accessed.
-
An error log function that records the results of various checks.
-

1.1.2 Unit Type

Name
FP2 ET-LAN unit
FP2 ET-LAN2 unit
Note) No accessories such as connectors or cables are included.

1.1.3 Structure of Network

Communication functions of ET-LAN unit
Using the ET-LAN unit to connect to an Ethernet (100BASE-TX, 10BASE-T, or 10BASE5) enables (1)
computer link function, (2) data transfer function, and (3) transparent communication function to be
carried out with other programmable controllers and computers connected to the network.
Combined use with a conventional MEWNET
The ET-LAN unit can be used in combination with another network unit such as the MEWNET-W/W2.
This makes it possible to connect an existing FA network to an Ethernet LAN, using MEWNET.
Part No.
FP2-ET1
FP2-ET2
Model No.
AFP2790
AFP27901
1-3