E-Mail Receive Error Transmission - Panasonic FP2 ET-LAN Technical Manual

12.3.6 E-mail Receive Error transmission

These error codes are displayed if an error occurs when receiving e-mails.
If one of these errors occurs, the E2 LED on the front panel of the ET-LAN unit flashes.
Code Name
C100H POP server
error
C101H POP server
error
C102H POP server
error
C103H POP server
error
C104H POP server
error
C105H POP server
error
C110H Setting error
C111H POP internal
error
C112H Receive e-mail
filter error
C113H Receive e-mail
format error
C114H Request e-mail
execution error
C115H E-mail basic
setting error (for
receiving e-
mail)
The contents of the e-mail when an error occurred are also stored in the mail error log area. For the
details of the mail error log, refer to <11.10 Mail Error Log/Mail Log Function>.
12-16
Description
User name is not authorized.
User name is not authorized.
Password is not authorized.
Information on the number of e-
mails in the POP server was not
acquired successfully.
Information on the e-mail data size
was not acquired successfully.
E-mail was not deleted
successfully.
UID was not acquired successfully.
Response format error occurred.
Response error occurred.
POP server operation could not be
checked.
E-mail information was not
acquired successfully.
APOP is not supported.
POP server receive time-out error
occurred.
The values of e-mail settings are
incorrect.
Specified UID does not exist.
Re-initialization error occurred.
Initialization error occurred.
Insufficient internal resource
File was not created successfully.
E-mail with the unauthorized
address and subject was received.
(This error occurs when Mail Filter
is set.)
ET-LAN received an e-mail in the
format ET-LAN could not
recognize.
Processing for the received e-mail
was not conducted successfully.
E-mail receive processing was
conducted although e-mail basic
settings were not set correctly.
Step to take
- Check the login name.
- Check the login name.
- Check the password.
- Check if the POP server works
normally.
- Check if the POP server or
network is not busy.
- Check if the e-mail
compressed or encrypted.
- Check if the encode/decode
format and file format are the
same as ones for ET-LAN.
- Check if the e-mail is not divided.
- Check if the POP server can be
indentified using the password.
- Check if the POP server works
normally.
- Check if the POP server or
network is not busy.
- Check if the e-mail settings are
correct.
- Turn OFF the power and then
turn it ON.
- If the error occurs again, please
contact us.
- Check Mail Filter settings.
- Check the e-mail contents of the
e-mail source.
- Check the request e-mail format.
- Check the e-mail basic settings.
Remark
If this
error
occurs,
the E2
LED on
the front
panel of
the ET-
LAN unit
flashes.
is not