Outline Of E-Mail Function; E-Mail Function Specification - Panasonic FP2 ET-LAN Technical Manual

11.1 Outline of E-mail Function

ET-LAN unit supports three types of e-mail functions: "Error Notice Mail," "Report Mail," and "Device
Watch Mail." The fixed interval function that the ET-LAN unit checks received e-mails in the mail server
can also be specified. These e-mail functions can be set using setup tool (Configurator ET).
Reference: For details concerning setup procedures, refer to "Control Configurator ET
Operational Guide Book" (ARCT1F341E) and the HELP window of Configurator ET.
E-mails can be sent and received using the ladder program. (Ladder e-mail send function and Ladder
received e-mail check function.).
Data can be read via e-mail using the e-mail send/receive function ("Request Mail function").
The e-mail function can be used regardless of the auto connection function status. That is, the e-mail
function can be used either the mode setting switch 2 is ON or OFF.

11.1.1 E-mail Function Specification

Item
Buffer memory size for storing e-mail
Note1
data
Up to 64
Supported
e-mails can
e-mail
be
functions
registered.
E-mail size
Address Book
Signature
Security for receiving e-mails
Note1) This size includes the e-mail main message, address book data, and signature data.
Note2) When sending and receiving e-mails, communication with the e-mail server is internally
conducted. Therefore, connection setting for communication with the e-mail server is not necessary.
(E-mail settings using the setup tool (Configurator ET) are required.)
Note3) E-mails that are sent and received do not support the encrypted data and compressed data.
ET-LAN e-mail receive function is supported only by POP.
Note:
The e-mail function is only available with Ver.2.00 or later of ET-LAN unit.
11-2
96K bytes
A fixed message, including error occurrence date, time and
Error Notice
the error code, is sent to the entered destination when an
Mail
error is detected in a CPU unit.
E-mail is sent to the entered destination at the specified
Report Mail intervals (1 to 120 min.) or at an appointed date (Date and
time). Up to three appointed times can be registered.
Bit device watch (X, Y, R, L T, and C)
Device
Word device watch (WX, WY, WR, WL, DT, SV, EV, FL,
Watch Mail
and LD)
Message
Message specified in the ladder send e-mail program
only
A message can be edited within 2000 characters (including
a line feed) every e-mail.
Up to 32 addresses can be registered.
"To:", "Cc:", and "Bcc:" can be specified.
User signature: 4 (editable)
Fixed signature: 1
A filter can be set for the incoming e-mail using a keyword.
(Sender's e-mail address, domain name and Subject)
Descriptions