Panasonic FP2 ET-LAN Technical Manual page 134

Signal Handshake
name method
Handshake
using I/O
Handshake
Receive
using shared
complete
memory
signal
Handshake
using shared
memory
Note:
The I/O number applies when the ET-LAN unit has been installed in slot no. 0.
-
Reception error signals are used only when the handshake is carried out using the shared memory.
-
9-14
Receive notified signal bit
Connec- Connec- Connec-
tion 1 tion 2 tion 3
X1 X5 X9
Bank 0: Address 360H
Bit 1 Bit 5 Bit 9
Bank 0: Address 364H
Bit 1 Bit 5 Bit 9
Bank 0: Address 366H
Bit 0 Bit 1 Bit 2
Connec- Connec- Connec-
tion 4 tion 5 tion 6
- - -
-
- - -
Bank 0: Address 365H
Bit D Bit 1 Bit 5
-
Bit 3 Bit 4 Bit 5
Connec- Connec-
tion 7 tion 8
- -
- -
Bit 9 Bit D
Bit 6 Bit 7