E-Mail Send Error - Panasonic FP2 ET-LAN Technical Manual

12.3.5 E-mail Send Error

These error codes are displayed if an error occurs when sending e-mails.
If one of these errors occurs, the E2 LED on the front panel of the ET-LAN unit flashes.
Code Name
C000H SMTP server
error
C001H SMTP server
error
C002H SMTP server
error
C003H SMTP server
error
C004H SMTP server
error
C010H Registered
condition
setting error
C011H Server
connection
error
C012H Internal
resource error
C013H E-mail basic
setting error (for
sending e-mail)
C014H E-mail send
setting error
C020H E-mail re-send
error
The contents of the e-mail when an error occurred are also stored in the mail error log area. For the
details of the mail error log, refer to <11.10 Mail Error Log/Mail Log Function>.
Description
E-mail service of the SMTP server
does not work.
The server was shut down when e-
mail was being transferred.
The requested command was not
executed.
The specified command was not
executed due to the local error.
The requested command was not
executed.
Cause of the error: Memory
shortage of the file system.
Syntax error of the command
Parameter error of the specified
command
The specified command was not
executed, because the destination
address did not have the e-mail
box.
The specified command was not
executed due to the file system
problem.
E-mail was not transferred
successfully.
The SMTP server received an
unsupported command.
Command execution order has a
problem.
The parameter for the specified
command is not supported.
The user specified for the
destination does not exist.
The specified command was not
executed due to a problem in the
mail box.
Setting contents have a problem
which are notified to the SMTP
server.
Access to the server was not
conducted successfully.
Communication time out error
occurred.
Internal memory to be used is
insufficient.
Excessive send buffer size.
Access to the internal resource
was not conducted successfully.
User tried to send an e-mail
although the e-mail basic settings
were inappropriate.
User tried to send an e-mail
although the e-mail send setting
using the ladder program was not
correct.
User tried to send a response mail
whose destination is not specified.
User tried to re-send the e-mail for
the specified number of times, but
the e-mail was not sent
successfully.
Step to take
- Check the e-mail settings.
- Check the SMTP server status
through the server administrator.
- Check the SMTP server status
through the server administrator.
- Check if the network is not busy.
- Check the e-mail settings.
- Check the SMTP server status
through the server administrator.
- Check the e-mail settings.
- Check the e-mail settings.
- Check the e-mail settings.
- Check the SMTP server status
through the server administrator.
- Check if the network is not busy.
- Check the e-mail settings.
- Turn OFF the power and then
turn it ON.
- If the error occurs again, please
contact us.
- Check the e-mail basic settings.
- Check the e-mail settings.
- Check the SMTP server status
through the server administrator.
- Check if the network is not busy.
Remark
If this
error
occurs,
the E2
LED on
the front
panel of
the ET-
LAN unit
flashes.
12-15