Precautions When Using The E-Mail Function - Panasonic FP2 ET-LAN Technical Manual

11.2 Precautions When Using the E-mail Function

Check items before using the e-mail function
-
Q1: Is ET-LAN unit installed in the network environment that can be connected with the e-mail server?
→ Proceed to Q2.
YES
→ E-mails cannot be sent and received without using the e-mail server.
NO
→ Check with your network administrator.
Not clear
Q2. Do you have the IP address used in the network that is connected with the ET-LAN?
→ Proceed to Q3.
YES
→ E-mails cannot be sent and received without the IP address.
NO
→ Check with your network administrator.
Not clear
Q3. Do you use the e-mail setup tool, Configurator ET?
I want to use it when sending e-mails. → Proceed to Q3.
YES
I want to use it when receiving e-mails. → Proceed to Q5.
I want to use it when sending and receiving e-mails. → Proceed to Q4 and Q5.
→ E-mail setting cannot be performed without the setup tool (Configurator ET).
NO
Q4. Do you have the IP address for ET-LAN unit?
→ E-mail send function can be used. Set up the necessary items according to this
YES
manual.
→ E-mails cannot be sent without the IP address.
NO
→ Check with your e-mail server administrator.
Not clear
Q5. Does your e-mail server support POP?
→ E-mail send function can be used. Set up the necessary items according to
YES
this manual.
→ E-mails cannot be received, because ET-LAN e-mail receive function is supported
NO
only by POP.
→ Check with your e-mail server administrator.
Not clear
Q6. Do you have the POP account and POP password for the ET-LAN unit?
→ E-mail receive function can be used. Set up the necessary items according to this
YES
manual.
→ E-mails cannot be received without the POP account and POP password.
NO
→ Check with your e-mail server administrator.
Not clear
11-3