Table Of Shared Memory - Panasonic FP2 ET-LAN Technical Manual

15.3 Table of Shared Memory

Initialization information setting area (Bank 0)
Address Name
200H Source node IP address
(L)
201H Source node IP address
(H)
202H Communication function
setting between
networks
203H Source node
MEWTOCOL station
number
204H Reset request flag 1
205H Reset request flag 2
206H Reset complete
notification
207H Reserved
(Used by the system.)
Default Set value and explanation
0000H [Set value] Source node address
- Address example: 192.168.1.1 (C0 A8 01 01H)
IP address (L): 0101H
0000H
IP address (H): C0A8H
- Any address other than 00000000H and FFFFFFFFH is valid.
0000H [Set value]
0000H: Communication between networks not used.
0001H: Communication between networks used.
- Specifies whether or not communication is carried out between
networks using a router.
- When communication between networks is used, the routing
information setting area should also be specified.
0000H [Set value] 01H to 40H (01 to 64)
- Specifies the MEWTOCOL station no. of the source node as a
value between 01 and 64 when MEWTOCOL communication is
used.
- Specify a number that does not overlap that of any other station
on the network.
* A dummy value should be set even if MEWTOCOL
communication is not being carried out.
0000H Reset the ET-LAN unit. Write 55AAH to reset the ET-LAN unit.
0000H Reset the ET-LAN unit. Write 55AAH to reset the ET-LAN unit.
0000H When the ET-LAN unit has been reset, 90FFH is set in this area.
- When any value is written, it should be 0000H.
15-5