7.3 Read/Write of Elapsed Value
7.3 Read/Write of Elapsed Value
7.3.1 Elapsed Value When Power Turns On
● The default for the elapsed value when the power turns on is ""0"".
● The count value when the power turns on can be set to any value as necessary. It can be set
to an arbitrary value in the configuration menu of the tool software or user programs.
7.3.2 Reading Elapsed Value
The elapsed value can be read from the unit memory area.
Example) Program to read the elapsed value of the counter CH0 for external inputs
7.3.3 Changing Elapsed Value
The elapsed value can be set to an arbitrary value using a user program as necessary.
Example) Program to change the elapsed value of the counter CH0 for external
inputs to 100000
■
Unit memory (UM) allocation
Signal name
Counter elapsed
value area
7.3.4 Resetting/Presetting Elapsed Value
The counter elapsed value can be preset by the output ChxRST.
7-10
CH0
CH1
UM00110-UM00111
UM00112-UM00113
CH2
CH3
UM00114-UM00115
UM00116-UM00117
WUME-FP7MXY-06