Removing Finished Sets From The Stacker - Konica Minolta bizhub PRESS 1250 User Manual

8.9 Using Large Capacity Stacker LS-505
5
Press [OK] on the Output Setting Screen to return to the Copy Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
NOTICE
The stacker of Large Capacity Stacker LS-505 has a limit in capacity. Be careful not to exceed the
limit, otherwise unexpected trouble may be caused.
8.9.2

Removing Finished Sets from the Stacker

1
Press the paper removal button.
The stacker unit will move down to the carriage.
% The paper stopper is provided to secure the paper in posi-
tion when moving the carriage. See page 8-59 for details.
2
Open the large capacity stacker door.
% Once the stacker holds a sheet of output paper, the large
capacity stacker door will be locked and cannot open till the
stacker unit goes down fully to the carriage.
3
Withdraw the carriage by holding its handle.
NOTICE
Be sure to withdraw the carriage straightforward. Do not
change the direction forcibly while driving it. The carriage is for
the exclusive use of carrying paper. Do not drive it in any other
use. Never put yourself in the large capacity stacker.
4
Remove paper from the carriage.
The stacker unit can be removed from the carriage.
NOTICE
Once lowering the stacker unit for the purpose of removing mis-
handled paper or checking output sheets, copying cannot be
started till output sheets are removed. If the carriage is returned
with any sheets left on the stacker unit, machine trouble may be
caused. Be sure to remove all the sheets.
bizhub PRESS 1250/1052
8
8-58