Preventing Multiple Feeding In Post Inserter Of Folding Unit Fd-503 - Konica Minolta bizhub PRESS 1250 User Manual

Hide thumbs Also See for bizhub PRESS 1250:
Table of Contents

Advertisement

8.3
Using Folding Unit FD-503
Covers for perfect binding
1
Load cover sheets in the upper/lower tray of the post inserter.
NOTICE
Do not load more than 500 sheets (22 lb Bond) for each of the
upper tray and lower tray. Do not load above the limit line indi-
cated on the guide plate.
2
Use Insert Sheet, Booklet and Perfect Bind to attach a cover sheet.
8.3.4

Preventing Multiple Feeding in Post Inserter of Folding Unit FD-503

Multiple sheets may be fed when loaded in the upper/lower tray of the
post inserter.
Three feed rollers are attached to each of the upper tray and lower
tray, and used for feeding sheets. Locking the rollers on both sides
and using only the middle one may be effective in preventing small
cover sheets from skewing.
%
As shown below, push both roller lock levers inside to lock
them.
NOTICE
Be sure to lock the rollers on both sides, when required. Do not lock
the paper rollers in usual operation.
bizhub PRESS 1250/1052
Perfect binding
8
8-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub press 1052

Table of Contents